1996 Ford Probe "low beam fog lights" Questions

...rear fog is the defrost switch,you are in the right area.If the switch is not there,they could have been dealer installed and are wired to come on when the low beams are on. Hope this helps,Good ...

looking to replace relay switch but can tell which on is the headlight relay find the low beam light relays by law the fog lights can only come on with low beam using fog lights on high beam is ******

...low beam the last wire will be ground wire as fog light have only one beam you can use the low beam wire and parallel wire it to the fog lights that way you have the head lights still and the fog ...

...are registering inside car( fog light, low beam, and high beam indicators turn on and off with switch ( Properly working inside)). hi try checking the relays the 1 for the low beam may be ...

...fog lights at the same as the high beams. Also how can i hook up the low beams and high beams the same time? hi, you could just run a possitive wire from the back of your high beams straight to your ...

fog lights and high beams work, but not the low beams 2002 subaru outback: passenger side fog lights and high beams work, but not the low beams. swapped the fuses and the bulbs but they still don't ...

...Fog Lights. Low beams are fine. Fuses are good and these are new bulbs. Inside console indicator lights also do not illuminate for either the High Beams or Fog Lights. I doubt that both console ...

...low beam lights not working, I would have the headlight switch checked, or check for a bad fuse or possibly a relay if your car has a light relay. Some do and some don't, I am not that familiar with ...

...low beams. Then, the fog lights will go on only when they are turned on or off. Otherwise, you could have a relay that is controlled by a switch that independently operates the relay and thus the fog ...

... The high beams work, the fog lights work, the driving lights work, all the interior lights work, but the regular low beam headlights do not. Any thoughts? high low switch is gone or both low beams ...