1996 Ford Contour "back lamps fuse focus" Questions

changing the fuse that controls the tail lights I have a 2000 Focus Wagon. My dash lights and tailights are on same fuse labeled in the book as back up lamps. In my fuse box it is #32. Hope this helps

reach in and pull back liner, Remove nuts to release light lens. then push, turn and pull out bulb socket and same for bulb. Fuses are fine but tail lamps, license plate lamps, cluster lights are out

back up lights all work. All the fuses under the hood check ok as well as the fuses under the dashboard. I've installed new bulbs, but still no tail lights. Where should I check next? Tail light bulbs

...Back Up Switch Input Circuit Failure GEM If the reversing lamps are inoperative, Go To Pinpoint Test Q . If the reversing lamps are always on, Go To Pinpoint Test S . When the transaxle is placed in ...

...lamps light when you pull the stalk towards you? If yes, the bulbs are ok. Do the hig beams work? Your headlamps have sepaerate fuses for each headlamp and you have a low beam relay and a high beam ...

...back running lights are not working. All other lights work When the headlamp switch is placed in the PARKING LAMPS ON position, voltage is supplied to the front parking lamps, the side marker lamps, ...

...lamps or back lighting . Warning lamps - check engine ,ABS , air bag , low oil , battery etc...... How long have you had this car ? Someone cutting wires was probably trying to get rid of the PATS ...

...back up lights work. When I put a continuity check on the negitive battery post, and the fuse it reads a short, when the parking lights come on. The short goes when the brakes are aplied or the left ...

...back to the fuse block to find out where it is shorted.2.  If the fuse does not blow, then take a test light (make sure it uses an incandecent lamp - the LED type will not work for this ...

...high beams do It happens when the headlights are used. After some time they go out and do not come back on. If the cars sits for a few hours they come back on and will stay on for no specific time ...