1994 Ford Explorer Limited "remove fan shroud" Questions

Ad

Question about Ford Explorer

2 Answers

fan and remove from the vehicle. Remove the radiator lower support rubber insulators. get your tools out and give it a go ,cant be difficult as you think ,i have never done one on this vehicle but the

Ad

fan? I can remove the fan from the arm its connected to but not completely free of the arm to replace. Usually its easiest to remove the fan and shroud together, shouldn't be much of a problem finding

Ad

Question about Ford Explorer

1 Answer

...remove the clutch and fan? this is hard you need to remove the manual trans house first then the bolts well here it is with the kit for replacement clutch parts it will come with instructions its all ...

Question about Ford Explorer

2 Answers

remove the fan. My dad is having a fit and says that's it, but I don't see any clearance issues with the fan/shroud on there. Any suggestions? you have to remove the fan shroud first then unbolt the a

Question about Ford Explorer

1 Answer

...remove it off the rack. There also was a clamp in the middle to hold it against the engine . I replaced my rack earlier but the o rings inside the compression style fittings degraded and would not ...

Question about Ford Explorer

1 Answer

...Remove the fan/clutch assembly and shroud. Loosen the water pump pulley attaching bolts. Remove the accessory drive belt. Remove the water bypass hose from the pump. Disconnect the heater hose at the ...

Question about Ford Explorer

1 Answer

...fan, the accessory drive belt and the water pump pulley with the bolts.11Take out the accessory drive belt. Disconnect and remove the heater hose and the bypass hose from the pump.12Remove the ...

...remove fan shroud most likly 4 small bolts two per sidedisconnect all hoses ,lines and sensors from radiator remove two radiator brackets, upper left and right corners lift radiator straight

Question about Ford Explorer

1 Answer

...Remove the fan bolts as well as the shroud, followed by the 4 radiator push pins. Also remove the A/C condenser brackets near the rear of the radiator, and wire the A/C condenser in place to keep it ...

...should be stamped into the fan shroud plastic near the hood latch.You will most likely need to remove the air duct for clearance. You may need to loosen, or remove the the fan shroud for

Not finding what you are looking for?
1994 Ford Explorer Limited Logo

859 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...