Question about Ford Explorer
...remove the ball joint. WARNING Do not damage the ball joint boot when installing the special tool. To install: 1. Installation is the reverse of the removal procedure. NOTE Clean and inspect the ...
...remove and install ball joints Year,4x4 or 4x2? The upper ball join as well as the lower ball joint (1994 Explorer 4 Wheel Drive with the Manual Locking Hub.) Ball joints are pressed in. Upper ball ...
...ball joints). remove the snap ring from the lower ball joint and hit it out with a hammer. You will need a ball joint press to install the new ball joint. Let me know if you have any questions. Thank ...
...remove them called a "BALL JOINT PRESS" so with the tool u don't need to remove the control arm, which is a huge job on the 4 wheel drive model. here is the tool and part number from www.rockauto.com ...
...remove ball joints Ball joints are pressed in, so you have to use a press of some sort to get them out. If you don't have that, you can use a dremmel to cut the old one out, but be EXTREMELY careful, ...
...remove ball joints and reinstall on a 2005 how to remove ball joints and reinstall on a 2005 ford explorer (eddie Baurer) did not pass inspection right side is the worst front tires showed wearing ...
...remove the ball joints both upper and lower on the front drivers side are the joints pressed in place yes they are pressed in, you need a tool called a ball joint seperator(avalible at your local ...
...remove an upper ball joint from a 2004 ford explorer The ball joint on your vehicle is not replacable by itself. The control arm which holds the ball joint must be replaced. The nuts holding the arms ...
...ball joint or tie rod end. with the vehical suported onjack stands on the suspenstion ( not the frame) with the front wheels removed turn the steering wheel back and forth as you hold onto the ...
859 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions