1994 Ford Explorer Limited "oxygen sensors" Questions

...oxygen sensors from exhaust manifold, inlet pipe, or dual converter Y pipe, using an Oxygen Sensor Wrench. Installation To install, reverse the removal procedure. Apply a light coat of anti-seize ...

I HAVE A1996 FORD EXPLORER WITH CODES PO133:02,PO155:02P1115 DTC P0133 - Oxygen Sensor Circuit Slow Response (Bank1, Sensor1) This involves the front oxygen sensor on Bank 1. This code indicates the ...

i have a1996 ford explore with this codes p0133:02,po155:02,p1115andpo0306 DTC P0133 - Oxygen Sensor Circuit Slow Response (Bank1, Sensor1) This involves the front oxygen sensor on Bank 1. This code ...

...are red/white, orange,grey/white and grey. But the connector Ford Explorer is equipped with two oxygen sensor positioned on the exhaust manifold. Its necessary to replace the oxygen sensor at the ...

...oxygen sensors in front and behind the converter are reporting too similar of readings Possible Solutions: Some suggested steps for troubleshooting a P0420 error code include: * Check for exhaust ...

...of the way ,or try long nosed pliers carefully here, sorry no simple answer YOU HAVE TO REMOVE THE OXYGEN SENSOR FROM UNDERNEATH VECHICLE.YOU HAVE TO RAISE SUPPORT VECHICLE ON JACK STANDS ON LEVEL ...

codes p0132 and p1132 check engine light on showing codes p0132 and p1132 p0132 is heated oxygen sensor.......wiring short to positiveand p1132 is heated oxygen sensor not switching, fuel trim, rich ...

oxygen sensor is cloged i think i cant let the truck fall below 1500 rpm or it will die out oxygen sensor is a sensor there is no in or out in them you cannot clog them. fuel pump is slowly going or ...

how many oxygen sensor do a 1999 ford explore have There are 4 oxygen sensors. 2 upstream and 2 downstream.

...the oxygen sensors located in my 1994 ford explorer A 1994 Explorer has 2 oxygen sensors, should be either screwed into the exhaust manifolds at their outlets or into the ehaust pipes near the