1993 Ford Tempo "probe light open" Questions

Ad

...light or volt meter to probe the back side of each fuse without even removing them.... there is an opening behind each connector in the part of the fuse that faces you when it's installed. All fuses ...

Ad

...light grounded, probe one of the wires - the power wire should light the test light up. If neither wire light the test light then you have an open on the power circuit. You will need a wiring diagram ...

Ad

How do I change the brake light blub on a 1994 ford probe open the trunck remove the matt you will see the light house open it take the holding out and replace you will need no tools

Question about Ford Tempo

1 Answer

...Open a bulb and then turn the switch on and then check voltage from the socket. (Use volt meter. 1 probe touch each end. If no voltage then next 1 probe on the car frame (Metal) and 1 probe on the ...

...PROBE GT. The headlight doors open and close on their own constantly without the light switch on. The headlight switch is called a multi-function switch. That is the problem, its going out, if you ...

...light by touching the probe on the negative post on the battery and the test light should light up. Next with the headlights off-probe the other terminals and if there is a good ground in the harness ...

...light system (that's what's it's called in the service manual), you should look at the following wiring diagram to try and understand how the system work. This will help you to logically walk through ...

Question about Ford Tempo

1 Answer

probe on Light Green/Blue and - probe on Brown/White...Turn key to on (don't start)...Record reading...Move Light Green/Blue probe with safety pin and push it into the Gray/Red wire...Record reading..

Question about Chevrolet Cars & Trucks

2 Answers

...fuse in the fusebox will be powered. You touch the probe into both ends of each fuse to test them. Good fuses will light the tester on both ends. Bad fuses will only light up on one end.Good

light clip to ground and probe the socket terminals. There should be one hot terminal (from fuse D) with the key off and 2 hot terminals with the key on (turn-on signal from ignition switch). Move the

Not finding what you are looking for?
1993 Ford Tempo Logo

412 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Ford Tempo
1992 Ford Tempo

207 Questions

1994 Ford Tempo
1994 Ford Tempo

161 Questions

1990 Ford Tempo
1990 Ford Tempo

115 Questions

1989 Ford Tempo
1989 Ford Tempo

112 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...