1993 Ford Crown Victoria "remove gas tank cover" Questions

Ad

...gas tank as you remove the filler pipe. As a note, when you reinstall the filler pipe, insert small amount of vasoline on filler pipe end that is inserted into the gas tank to facilitate the ...

Ad

Question about Ford Crown Victoria

1 Answer

...gas from the tank. The fuel pump is located inside of the trunk. When you turn the key to the on position, have someone listen inside of the trunk for the faint sound of a motor come on. If you hear ...

Ad

Question about Ford Crown Victoria

1 Answer

...gas filter remove the hose leading to the gas filter, put it in your hose and place the other end in the gas container (ITS LIKE YOUR extending the hose to your gas container instead of the filter. ...

Question about Ford Crown Victoria

1 Answer

...gas cap off and remove the bolts holding the filler neck in place...Then jack up vehicle and place on jack stands....Remove battery ground cable,go under and remove sheild covering fuel tank,while ...

Question about Ford Crown Victoria

1 Answer

...gas cap, remove the rear seat, you will see a cover, remove the cover, you will now see the top of the gas tank and also the pump, the pump is located inside the tank and can be removed from the top, ...

Question about Ford Crown Victoria

1 Answer

...gas tank, you will need a special tool to remove the cover, the fuel pump is inside, " note , sometimes you have to drop the gas tank to do this procedure, it can be time consuming. it is also best ...

Question about Ford Crown Victoria

1 Answer

...4 or 6 bolts, remove the cover and you gain access to the top of the gas tank, remove the cap and there you have the fuel pump, if this model dont meet this criteria you have to remove the gas

Question about Ford Crown Victoria

2 Answers

...remove gas tank straps, lower gas tank with a jack, install is reverse.....if you need to just replace the fuel pump you don't have to remove tank you Can access from under rear seat good luck and ...

remove the screws or bolts. Some sending units are a "twist-lock" type. They work like the old twist-lock gas caps. You'll see a few notches along the outer ring of the sending unit. Place the tip

gas tank and access in inside the van between the first row and second row of seats. The access is covered with a carpeted cover and then another metal cover which screws into the gas tank. Then there

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

355 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...