1991 Ford Probe "replace filler hose tank" Questions

Ad

Question about Ford Probe

1 Answer

FILLER hose of the fuel Tank. for cracked or Pinched at any side. ALL the hoses of the fuel tank Must be good. Now go to the Engine side. the Vaccum on the Evap. Selenoid . if there a Vaccum check the

Ad

...GOES TO GAS TANK.LET W-D40 SOAK A LITTLE. GET SOME LARGE CHANEL LOCK PLIERS.GRIP HOSE TWIST A LITTLE WORK IT OFF.GAS TANK.BECAREFUL NOT TO MAKE ANY SPARKS WITH PLIERS.BESURE TO REPLACE FILLER

Ad

...replace the filler hose it looks as if I would have to drop the tank in order to get to the connection. Any suggestion? Look again into the fuel filler there should be a metal hose which is where the ...

Question about Ford Probe

1 Answer

...tube from under the car.Remove the hose clamps to the rubber hose going into the tank and pull off the hose.Now the filler tube will come out[ if has'nt already fallen out and hit you in the

Question about Ford Probe

1 Answer

...back up to get to the connection on the filler and do the same with the sealant. Replace the clamp and finish the tank install. This is not an easy job and that adhesive does not come off your

...replace the gas filler neck I do not have experience with a Durango. I have experience with a Chevrolet. The hose on the filler line was large diameter and very hard. It would not slip off. I had to ...

Question about Ford Probe

1 Answer

...filler tube by hose clamps. Loosen both clamps.. You should replace the rubber connector, as it has been there for many years, and rubber degrades. Loosen about three or four bolts along the filler ...

replace oem fuel filler hose to enable sucessful evap test results BUT now fuel only ''trickles'' from gas pump nozzle and clicks OFF constantly... ''Q'' > WAS THE TANK RE POSITIONED TOO HIGH AFTER

...REPLACE A FUEL PUMP FOR A NISSAN XTERRA 2005 ?. Removal & Installation Before servicing the vehicle, refer to the precautions in the beginning of this section. Relieve the fuel system pressure. ...

...filler hose? Are they hard to replace? Where can I get some lenght of hose? thx, ColdinWisconsin take a tape measure and measure th gas tank neck its better 2' hose and cut the excess after you hook ...

Not finding what you are looking for?
1991 Ford Probe Logo

94 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1993 Ford Probe
1993 Ford Probe

235 Questions

1994 Ford Probe
1994 Ford Probe

215 Questions

1995 Ford Probe
1995 Ford Probe

166 Questions

1996 Ford Probe
1996 Ford Probe

158 Questions

1990 Ford Probe
1990 Ford Probe

87 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...