1991 Ford F250 "throttle body" Questions

Ad

...throttle body. Follow the big hoses from the air filter housing back to the engine and the first part on the engine you come to...... is the throttle body. Buy the throttle position sensor first and ...

Ad

Question about Ford F-250

1 Answer

...on titan v10 f250 Do a throttle body cleaning and that should help with the idle. Cleaning the throttle body will also clean out the tabv (throttle body air bypass valve)valve which controls the

Ad

...from beneath the throttle body View of the throttle position sensor mounting-4.9L, 5.0L and 5.8L MFI engines shown, others similar Exploded view of the throttle body mounting-5.0L and 5.8L ...

Question about Ford F-250

1 Answer

...and try cleaning the IAC before replacing it. You can clean it with throttle body cleaner by spraying through the IAC passage way in the Throttle body opening. Thank you for using Fixya and good ...

...throttle body and make sure the butterfly valve is moving properly. also on the side of the throttle body is a valve called an IAC,it controls the idle speed.take it out and spray the spring with a ...

...throttle body idle speed control device... See below on diagnostics The curb and fast idle speeds are controlled by the Engine Control Assembly (ECA) and the Idle Speed Control Bypass Air Valve ...

...it should be for that throttle position. When you get the sensor, make sure you also get the throttle body gasket and clean the throttle body very well while you have it off the engine. Good

...throttle body near the throttle plate. some of these are cleanable. it is held in with 2 8mm bolts. remove from throttle body and then seperate the solenoid from plunger by removing 2 phillips screws ...

...out of the hose that runs into the throttle body.. any suggestions? Take the fuel line off at the throttle body and at the filter, then blow the line out backwards-push all the water out of the

...throttle body and make sure nothing is stuck. If those check out then check out the pedal itself and make sure that the shaft is pulling the throttle cable the way it is supposed to and no throttle ...

Not finding what you are looking for?
1991 Ford F250 Logo

437 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...