1990 Ford Bronco "hits 90 39" Questions

...39;s reve high. When we put the car in reverse, it does move when you hit the gas. Any suggestions? Transmission fluid level are OK. Failed Transmission Time for a rebuild I understand this post is ...

...did from the 60's thru late 90's. Now it is just that simple button on your dash. If 4 wheels are showing & is lit, you should be in 4 wheel drive if all components working

...90 model 454 chev 3500 was runnin great.. Then a few months ago.. when it was raining it started spitting and sputtering, but only when it was raining.. When it was dry it ran fine... The other day I ...

...hits third then it stays at around 3000 on the tack at 90/100 kmh and won't shift Hi! It might be the reason why the check engine light come on. And all i can say is you need to scan your can and ...

...39;ll shift to 3rd and begin picking up speed nicely, then will shift into 4th (OD). Torque converter lock up is working. OD works. I can manually shift around with the shift lever. Any ideas??? it ...

...90 mph easily and the car runs smoother. Since you've done all that other stuff, give the ignition control module a try as the person above me suggested. I think that really is your ...

...90 degree elbows at the same time ( might as well so you don't have to do it all over again). Assembly is just the reverse of the above. FYI these elbows break so often that you can now buy ...

...90 deg hook on one end about 1/2 inch. you need a screwdriver about 7 inch's long. Get you a good light so you can see inside the drum and see the lock and push it away from the adjustment wheel, ...

39;t work check to see if your getting current to the sensor with a volt meter or test light. if you are then it sounds like you already know what the issue is... replace the sensor. and yes it really

90' toyota pickup V6 automatic). grinds all the time when i get moving, sill stop for a second if i hit a bump, then start doing it again. ive alr Rotational grinding noise from front driver side