Question about Dodge Dakota
...work so you ruled out that power and the socket and bulb are OK! now, you have to check the ground side of that circuit... find the bolt, remove and clean that ground connection, re-install that ...
...ground reach your hand up there and turn the lite socket to realease and replace bulb. There is a tab holding the tail lite in place even after you take out the screws and it can break, if it does ...
Question about Dodge Dakota
How do I fix a fuse that pops ever time I pull the light switch? 96 dodge Dakota no tail lights no side markers no license plate lightship. Has head lights turn signals brake lights reverse. Fuse only
...bar into the brake lines on a 2000 dodge dakota without trailor plug With both tail light lenses removed locate the black with yellow wires and the dark green with brown wires coming out of the ...
...ground wire. Remove some of the insulation around the ground wire. Twist one end of the extra wire around the exposed ground wire. Touch the other end to a solid piece of metal. If the brake light ...
...remove the bulb the socket shouldnt have any melted area in it, also take a good look at the ground wire coming off the sockets, a quick test is to connect a wire to a good metal ground and then ...
Question about Cars & Trucks
...remove a hills clothesline from the socket that has been concreted in the ground the clothesline has been in the socket for about 3 years without being removed if you throwing it out just get a disc ...
Question about Dodge Dakota
...remove the left front and check the bulb and the socket and then check the ground to socket. Most of the time a dim light is due to a bad ground, the ground problem may be in the socket or the ground ...
Question about Dodge Dakota
...Remove the bulb & check the socket to be sure is is not corroded. Check for a good ground level on the ground wire of the affected socket either with ohm meter (with lamps off) or voltmeter (with ...
...to new location do step 4 again. If you still get no blink start probing wires coming into socket until prob lights working away from socket. Ground is on the side of the socket when you look in
741 questions posted
Usually answered in minutes!
1,021 Questions
870 Questions
712 Questions
723 Questions
618 Questions