2004 Dodge Dakota "power headlight switch 2000" Questions

...headlight switch on a 2000 dodge dakota? My problem is my highbeams work but my low beams only work with the tilt up. I took the column all apart and if i move the wires i can get the low beams to ...

...power to headlight switch assembly. No light, won't do anything. Daylight running light do work and turn lights on. Relay? Which one? Not sure I follow you. Since 2000 most GM models use the dimmer ...

...work on my 1990 buick lesabre? On a 1990 Buick you have a fuseable link between the headlight switch and the battery. Do you have power in and out of the headlight switch and the dimmer switch

and lite green/blk for high beam which goes to the dimmer and then to the headlight switch. Dark blue/white is power from one fuse and dark green/orange is the other side power. One fuse for each side

...power through the fuse block from the battery. When you turn the headlight switch on, you should get 12v at the input connector to your headlights. If the headlight connector is not receiving +12v at ...

...power, then the problem is on the switching/ground side of the circuit. The body control module uses the ambient light sensor as an input and the headlight switch. If the light sensor see dark, the ...

...power is jumped to the lights they work. Do I need a new headlight switch, or do I have a wiring problem elswhere? your daytime running light module could be bad.there is also a headlight relay,and ...

headlight switch, checked all fuses, checked all bulbs, and cleaned the ground wires. I tested the power going to the headlights and have no power. I have power coming from switch. Maybe I should just

...power goes from the headlight switch then to the hi-lo beam switch and out to the bulbs. did you ck the bulbs?? they could both be burned out. The mechanic should not change anything until tests have ...

...headlights won't come on 2000 Jetta headlights won't come on. No low or high beam, Fog only. check fuse and if thats not problem then see if power u have power at switch if u do then switch is ...