2004 Dodge Dakota "change heater blower 2002" Questions

...heater blower motor?? I have an 2002 Dakota , my blower is on passenger side of truck, under dash by feet there was 4 small screws to take out blower just came out on mine. Something to check see if ...

REPLACED MOTOR, REPLACED RESISTER, STILL DOESNT WORK ????? if u changed all of that then it should be the heater control . have u given direct power to the blower motor? it is possible that its faulty

heater resistor on a 2005 dodge dakota? Behind glove box? Cannot locate this resistor. Blower fan works on high only, just want to change the resistor if I can find it? This is frustrating - no answer

...heater control box because when he turns the new knob from cold to hot, the doors get stuck due to corrosion around the bushing(?). Nissan said that I just might need to replace the actuators, the ...

...heater/defroster/ac switch 2001 Dakota only works on the high position. Sounds like a card located under dash behind your blower motor, on passenger side.When card starts going bad you will only have ...

...heater in my 2002 Dakota works only at the very highest setting. There is no power at the lowers settings. The defrost light doesn't come on until that setting also, so definantly no power. When ...

...heater blower. Check fuses and then the wire to the heater blower motor under the hood on the passenger side. Hope this helps i have a 2002 impala and i changed the resistor and the fuse. i got the ...

My 2002 old intrigue heater only works on the high blower. I changed the lower blower fuse but that didn't fix the problem Can you suggest what else may be wrong? bad blower motor resistor

...parts house and had it tested, it tested good. either have a fuse blown, or you need a resistor pack. it's located in the heater box next to the blower motor. you could have a blower motor relay ...

...heater fan only works on high speed so I beliver the problem is that the lower blower resistor is defectifve, but I am having problems finding it to change it Its behind the blower motor. You must ...