1987 Dodge Ram 50 "remove play differential" Questions

Ad

Play with it and see of it turns off your EGR light. check the round black vacuum valve,it is connected to egr valve by a vacuum hose,pry it apart gently,there is a rubber diapham inside,remove it and

Ad

Remove RWAL/ABS sensor from housing. NOTE: Side play resulting from bearing races being loose on case hubs requires replacement of the differential case. Mark differential housing and bearing caps for

Ad

...bearing will have to be replaced if that is the case your better off having a mechanic do the job. If there is no play remove the nut pull the yoke off replace the seal and reinstall in reverse

...remove used parts nine hours per day, and unless I know for a fact that the (front) rear is good, I take the cover off to inspect it for wear and/or potential damage. In this regard, it may have been ...

...a Transmission specialist (preferably an ASE Tech) or taking the differential out of the vehicle (removed from axles) and bringing it to Transmission specialist have them rebuild it and you ...

...differential or one of the many universal joints that connect all of the elements together. Check the U joints on the front drive shaft for play as well as the U joints on each of the front

Question about Dodge Ram 50

1 Answer

...play - it would only mean the bearing isn't worn badly enough to cause looseness in the wheel). You should be able to remove the axles without opening the diff up. If the axles have c-clips or snap ...

...differential. THe clunk or kick in the **** you feel is the axle spinning down at stop. The gears are what is making the clunking noise. When you release the brake and begin to accelerate teh gears ...

Question about Dodge Ram 50

1 Answer

it yourself, check fluid level first. if okay, drain fluid and remove cover. Check magnet on bottom for metal shavings, and check if any of the gears are movable. They should have no play what-so-ever

...play in each direction and hit something inside the differential making that noise. I was thinking of putting some steel shims somehow but they'd wear out fast since the axell would be rubbing hard, ...

Not finding what you are looking for?
Cars & Trucks Logo

171 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...