...vacuum leaks. With the engine running, wigglr every hose you can see, to make sure nothing is loose or cracked. 3.Change fuel filter. 4.Check timing. 5.Check air control valve. 6.Check idle control ...
Question about Dodge Ram 1500
...vacuum hose diagram for a 2011 Saab 9-5? Does anyone have a clear vacuum hose diagram for a 2011 Saab 9-5 Turbo 4? I get P0303 code and have replaced plugs, coil pack, checked wiring, has good ...
...vacuum hose leak or disconnect. start from the selector switch. take the bundle of hoses at the back of the controller and feel if there is a vacuum source.( the engine should be idling). if there is ...
vacuum hose but i'm not sure where the hose goes . Hi there. under your battery is the 4x4 actuator. there should be a vacuum hose that is connected to it. this actuator is the one that will lock your
4 barrel. The vehicle stalls intermittently hen stopped or backing up. VVhere do I start to troubleshoot? Possibly a vacuum leak. Check all the vacuum hoses and make sure they are connected; check for
...vacuum hose about what ever length you need.place vacuum hose over spark plug insulator then install spark plugs to hard reach places to keep from cross threading.if plug tighten 1/4 turn.back out ...
Question about Jeep Cars & Trucks
vacuum for 30 seconds, if not its bad. easy huh. at the same time you see the actuator rod suck in, does it fully? off car? 2: you can connect a hose from tool to the on car slave.nipple directly then
...hose is connected to a vacuum actuator that controls the front axle engagement. It is always coming loose because of the sharp bend in the hose where it hooks up to the actuator. There is also a hose ...
...vacuum to the front diff. if the actuator is very rusty it may have a leak. Theres a vacum unit on the top of the front axle on the left side it has a medal dust cover around it , the 2 hoses connect ...
1,568 questions posted
Usually answered in minutes!
264 Questions
1,788 Questions
1,318 Questions
677 Questions
707 Questions