2001 Dodge Ram 1500 Truck 2WD "differential specs" Questions

I have a 2005 Dodge Ram 4x4 I need to know if there is a torque spec for the rear differential pinion nut? If so what is it? 150 foot lbs. Will need to put a pipe wrench and extender pipe on flange to

...differential on a 03 Dodge Ram 1500, The part we got is one hole piece. When I put it back in dose back lash have to be set? yes, when installing any gear components the back lash always needs to be ...

...specs on the nut PINION FLANGE & OIL SEAL CAUTION: Following procedure must be used to retain proper pinion bearing preload. Failure to follow procedure may result in premature axle assembly or ...

...is with an in/lb torque wrench on the pinion nut with the carrier removed. Not knowing which differential is in the truck, I'm guessing a 9.25" rear loader type. The correct way to do it is ...

What is the torque spec for a 1978 Ford pinto differential pinion nut? 1978 Ford Pinto 3.2 engine standard transmission. What is the differential pinion nut torque spec? 170 ft.lbs is the minimum; be ...

...specs for a 10 bolt rear differential cover on a 2006 Chevy trailblazer LT model? It has the 3.42 ratio (GU6) four-speed automatic transmission. The general torque spec is 25-30 ft-lbs for the cover ...

...specs on differential cover plate bolts. Suggest to remove cover and replace gasket with Permatex Gasket Maker Silicone. Fully clean and dry apply a 1/4 bead on cover and bolt down to 20 ft lbs. go ...

specs? how much oil (in quarts) and weight of oil? 2000 TOYOTA TACOMA 2.7L 4-cyl Engine Code 3RZ-FE Engine Oil Grade 1......API* All TEMPS......5W-30 Optional ..10W-30 Engine, 2WD, with filter........

...specs on 2004 Hyundai a Santa Fe 3.5 GLS differential cover plate bolts My differential cover is Leaking and want to remove it and reapply the RTV grey. I need to know what the torque specs for the ...

change differential fluid How do change the differential oil? Loosen the lower bolts on the cover to drain the differential,remove all bolts,remove cover and clean cover, replace gasket or silicon, ...