code means that the the car's computer has detected that one of the engines cylinders is not firing properly. In this case it's cylinder #7. Symptoms may include: the engine may be harder to start the
...code p1740 came up This default is for the transmission operation. The diagnostics detected an out of range condition. It can be a wet electric connector for the shift solenoids, or the flat cable to ...
...code. I had it scanned and electrically the computer is sending the signal for the torque convertor to engage yet mechanically it does not feel like it is engaging. The rpms remain the unchanged when ...
code even after the computer was reset several times. I was told by the tranny people that the rebuilt has the larger pressure booster valve cover upgrade. Dodge dealer said it is not a computer issue
...P1740 TCC Or OD Solenoid Performance P1756 Governor Pressure Not Equal To Target At 15–20 PSI P1757 Governor Pressure Above 3 PSI When The p1698 code is for the (bus) that is how the computers ...
...code stored in your onboard computer - that's the way it works. If you are using a generic OBD code reader, that is most likely the reason you cannot find any codes. You need to use a ...
code came up on my 2002 honda odyssey slipping going into upper gear should i replace shift solenoids and if so which one or ones YOU NEED A TRANSMISSION REPAIR MANUAL. OR SOME TIMES SINCE YOU HAVE TO
1,568 questions posted
Usually answered in minutes!
264 Questions
1,788 Questions
1,318 Questions
677 Questions
707 Questions