2001 Dodge Ram 1500 Truck 2WD "brake light fuse" Questions

...BRAKE LIGHT SWITCH ! CHECK FUSES, CHECK ALL BRAKE LIGHTS , AND THERE CONNECTIONS, SOCKETS, BRAKE LIGHT SWITCH @ BRAKE PEDAL, MAY HAVE COME OUT OF BRACKET IT MOUNTS INTO ! SWITCH COULD BE BURN OUT ! ...

...brake light switch and the brake lights still wont work tail lights work fine Replace bulbs, clean sockets, check towing harness, check brake swich under brake pedal. fuses??? Vitally Has the truck ...

brake lights work else works Look at fuse #18, a 15 amp fuse, in the fuse block. This fuse powers both the tail lights and instrument cluster lights. Usually both of these light systems are powered by

...brake switch on pedal...still doesn't work. Any ideas???Thanks! I would guess the brake fuse ( this does not use the same fuse as the tail lights/blinkers) or the ground for the brake light

brake light on2003 Dodge Ram 1500 The tail lights on both sides work. The brake light works on right, but not left. We changed the bulb. We looked for the fuse, but we find the tail light fuse, but no

brake pedal under the dash. With a test light, you need to see if 12V is reaching that pedal switch. If not, check the fuses for a blown fuse or other things not working on the same circuit. If you do

...brake lights are out since the rain, a tail light assembly is broken and filling with water enough to create a short to ground. If there's no broken lens, whitch normally only blows the bulb. Then, ...

brake light Flashing red brake light on dash. Brake lights work. Fuse not blown. Parking brake fully released. Brake fluid levels in normal range. No smell of dragging brakes; no sounds of worn brakes

...brake light switch at top of brake pedal-if you have a test light, you could check for power at the switch, and for power leaving the switch when pedal is pushed down. From there, the brake light ...

to see it there is any where it is touching earth. The brake light switch under the dash at the top of the brake pedal would be a good place to start as the live wire may be off and touching the metal