2001 Dodge Ram 1500 Truck 2WD "battery light goes amp" Questions

...goes flat remove the + terminal from the battery if a amp meter in series, the draw should be less than 1/2 a amp, if more there is a light or short that is causing the battery to go flat over

...goes off again. could you tell me what the porblem could be please. i would really appericate it. thanks Hi Clean battery cables and battery posts. If that does not work you probably need a new ...

battery. take a test light and connect the aligator clip part of the test light to the part of the cable that connects to the battery. Then take the "pointy" part of the test light and touch it to the

...light on just because of either taking battery terminals off every night or because I have not driven it enough to read if there are any codes being thrown off my computer. I am so worried about this ...

...battery (basically complete the circuit with the test light in the middle). If you have a big current draw, the test light will light. If the test light lights up, leave it connected and go to the ...

battery light on battery & alternator good. no corrotion on cables tech says he put full charge on my battery. don't know who to believe light only stays on a few minutes then goes off Check the ...

...light or amp meter in series from the battery post to the cable end, see if it lights up. If it does, then you will want to start pulling fuses one by one until it goes out. When it goes out, then ...

...light and remove positive battery lead. then hook up the test light in series ( the wire end with clip hook to cable that's off . and the pointed end for checking curcuits. goes to battery post. ...

...battery end ( the one u disconnected) with the volt meter set on amperage u should now be connecting ground back o the car. verify by opening car door and make sure interior light lights up. look at ...

battery post and pull fuses till the test light goes out. when the test light goes out you've found the circuit that's drawing down your battery. trace the circuit and look for a short to ground or if