high beam works only in the flash position 2004 ford Taurus high beam works only in the flash position (pulling aft) but does not work in the high beam position (pushing forward). sounds like a faulty
...high beam on actros 3848 when switch is pulled high beam works but when pushed forward high beam does not work tried replacing switch but switch is fine back for high beam forward for low beam high ...
...high beam not working the control is in the colum, if you pull lever spotties work, back to normal position low beam iluminates, push down dash indicator iluminates for high beam but no high beam ...
high beam position. If the headlamps stay off, try plugging the high beam relay into the low beam position. If the low beams now come on, the relay is shorted. If none of this works, I would recommend
Question about Cars & Trucks
...high beam lamps, then back to the underhood junction block. The low beam and high beam circuits continue to the headlamp switch. The low beam and high beam circuits also provide the body control ...
...high beam headlamps are On at reduced intensity for daytime running lamp (DRL) operation in daylight conditions, or low beam headlamps On in low light conditions. The DRL/EXT LTS fuse and the EXT ...
Question about Dodge Ram 1500
...high beam headlamps are On at reduced intensity for daytime running lamp (DRL) operation in daylight conditions, or low beam headlamps On in low light conditions. The DRL/EXT LTS fuse and the EXT ...
Question about Dodge Ram 1500
...high beam bulb works when stalk is in the normal (fully down) position, but both high beam bulbs will work when the stalk is pulled fully up. I would check for voltage at the dimmer switch
high beam by pulling the dimmer switch handle toward you until the dimmer switch is activated. When the dimmer switch is placed in the HIGH position, the indicator lamp input to the BCM is pulled low.
...to the on position (parking lights working - headlights won't come on), can you flash the lights to high beam. If so, you have a bad switch in the stearing columb. I had that problem on a 94 Ram
706 questions posted
Usually answered in minutes!
264 Questions
1,788 Questions
1,318 Questions
1,048 Questions
677 Questions