no voltage at coil Check the ignition resistor mounted on the firewall. It will be white in color with two terminals. One terminal coming in from ignition switch and the other going to the coil. Check
distributor the gear on top of the ignition module inside the distributor and I don't know how to so I can change the ignition module You remove the pin and drive gear from the bottom of the shaft and
how to replace an ignition switch on a 1984 dodge d 150 pickup I need to replace the ignition switch and not sure how Thankyou for connecting me. But electroncis entertainement equipments repair
When you turn the ignition over to start there is no power coming from the switch to start the truck, The battery is fine the starter doesnt even try to turn over check your ignition switch. It's ...
...pole piece the magnets oppose each other's magnetic field (relucting) signaling the coil pack ignition transistor to fire. so check with a meter to see if you have voltage to the ignition
...to resister could be the starter switch on top of steering column under dash. Key switch is not ignition switch. The key switch pulls a lever up on the ignition switch if switch is not set right ...
works sometimes and when it is working and you hit a bump it goes of Check all the ignition wires and conections.
not getting no spark to my plugs, i changed the ignition coil, pick up coil, rotor, distributor, plugs, wires and the ECM, ignition coil is getting about 10 ohms, did you check your sensor crank or ...
...or longer then just quits, not like a fuel problem quits no sputtering just dies like turning the ignition off. Coil is good already checked, electronic distributor seems ok but when she shuts off ...
ignition control module My trucks wants to start first time u go to start it but it won't I took the wire from the coil to the dist off the dist well i had a friends turn it over and it sparked twice ...
93 questions posted
Usually answered in minutes!
94 Questions
78 Questions
66 Questions
62 Questions
55 Questions