1995 Buick Park Avenue "39 read obd codes" Questions

...to read diagnostic code. Engine light on. Cigarette lighter works. Won't give code, 0. which obd tool do you used?maybe you used obd tool not can do your car.maxiscan us703 can do your

...39;read codes' is pressed it read out must connect to VEH TO RUN THIS TEST Checked pins they are good and tested 2006 F350 Power stroke truck OBD Scanner Will NOT Communicat When Pluged IN, and ...

...read these codes for free for you , once you get the codes ,, post them here ,, someone will help you determine which o2 sensor is faulty in your car ,, or just reply to this posting and I'll ...

...39;read codes' is pressed it read out must connect to VEH TO RUN THIS TEST Checked pins they are good and tested OBD auto scanner on another TK Works OK HOW Can YOU CHECK DLC or What Might Cause ...

...Read the Check Engine CodesHope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this ...

39;s the end of the stored codes... you have a 96, you should have an OBD2 port someplace on your van.  Go to an auto parts store and have them read your codes for free.  Then post that code

...and on vehicles. You will have to have a code reader,to purchase one now is cheap,at napa,I think it is 39 dollars right now ,or you can get auto zone to read them for free.

...39;ve contacted GM garages and have been told they do not have equipment that can read the codes on anything that old. It was suggested that I use a "jumper" between the A and B pins on the ...

...39;s computer has stored. The reason that the "engine symbol" appears on the dash is that the computer has stored an ODB-II code. You can get the code read free at Advance Auto Parts, Pep Boys, or ...

...read...In 1996 The national code software went to the second level...So, OBD I=vehicles with computers prior to 1996...OBD II is 1996  to present...OBD I did not have a place to plug in a ...