2005 Ford Freestar "change temp sender gauge" Questions

Switch ig. on, ground the sender unit wire for about 3 seconds see if the temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader. also check instrument voltage stabilizer

...is no temp sender module on the back of motor. Yes had all 3 things done at mechanic and lots of money spent to no avail. Anyone know what to do now? try the dealers and get a dealer fitter on the ...

...change the thermostat? when a temp gauge drops to cold ,it indicates a problem in the cooling system temp gauge sender units need water to activate the resistance that makes the gauge read so a ...

...temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader. I replaced sender and dash unit and still no gauge working. Ground sender wire and gauge read hot. Gauge reads ...

...gauge is not working take the single wire lead off the temp sender and ground it, if gauge goes all the way to hi , you need a temp sender, if no change then you have a wire issue or need a temp ...

...temp gauge is not getting above 130 i have changed both sensors and checked the wiring is it possible that the new tstat is bad Is it cold where you're at? Have you taken the wire for the gauge ...

...temp gauge works of a different sender to the coolant sensor. IT has 1 wire only and changes resistance as the water heats up there by moving the needle on the gauge up the scale Check that the wire ...

GOOD. REPLACED SENSOR PROBLEM STILL EXIST Switch ig. on, ground the sender unit wire for about 3 seconds see if the temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader

Switch ig. on, ground the sender unit wire for about 3 seconds see if the temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader. also check instrument voltage stabilizer

...temp sender unit for the temp gauge and a water temperature sensor for the computer. for the gauge the power comes from the power source ( ignition switch) through the gauge to the sender unit, ...