2003 Dodge Durango "turning switch 2000" Questions

2000 Dodge Durango SLT 4wd - turn signal is intermittent. All turn signal lamps are OK... flasher unit is suspect. How do I remove and replace flasher unit? these vehicles do not have flashers, it is ...

2000 Dodge Durango will turn over but not fire. Then turn key off and back on and it starts. What is the problem? problem switch Bad ignition switch

...2000 Dodge Durange, and the headlights just went out on the vehicle. I am not sure whats wrong. All the other lights work, interior, tai, brake, turns, high beams, fogs, etc. Its just BOTH HEADLIGHTS ...

2000 Dodge Durango My turn signals stop working. The highbeams don't stay on. How can I fix this? Where can I purchase the parts needed. you have a bad turn signal multifunction switch which is ...

...2000 Dodge Durango. Sometimes the blinkers work fine, sometimes they won't turn on at all, sometimes they blink 1-3 times and then quit. I checked the fuse and it's OK. I read about ...

Turn signals will not work tried everything what could be my problem? Start from the fuse box, check the fuse of the turn signals, now check the cluster switch to give the output as desired to the ...

...a 2000 Dodge Durango and the blower motor stays on high. It will not turn down or off. It can change the temperature from a/c to heat. REPLACE SWITCH. THE KNOB THAT HAS THE FAN SPEED POSITION

turn signals don't work, hazards do on 2000 Dodge Durango Points towards a problem with fuse or the indicator switch.

...2000 Durango, no turn signals or hazards. Fuses are all ok. The indicator lights don't even light up. According to the manual, there are two fuses for the turn signals/hazard lights, Fuse D in the ...

turning it uses a little more power. So the switch sends a signal to the computer to bump the engine power up a little to compensate for the turning load. Keeps the engine speed from going erratic and