1999 Dodge Ram "reverse light 2500" Questions

2500 4x4 backup lights won't come on unless i pick up on the shifter leaver a little bit Replace reverse switch on transmission and adjust properly after replacing.

...light throdle. Strangely enough, the lock up is controlled by a chip, electrical. Carefully check the connections to both batteries, verify both are not faulty in any way, then remove the battery ...

...the reverse lights dont come on and there is new bulbs installed. possible bad reverse light switch or out of adjustment. located on trans or at point where trans shifter rod or cable hooks to

...running lights or 2000 gmc Sierra 2500 I have no running lights or reverse lights on the rear but have running lights up front and all signals work as do the brake lights. Could be bad circuit ...

...does brake light, or reverse light. Inside the signal light flashes fast. The filiment looks good on all lights, front left lights and blinker work. you got a bad ground on the taillight ...

...2500 tail lights back lights are not working but brake lights and reverse lights are. When you turned on the lights for night, the headlights are on but no tail lights tail lights not working Y would ...

...for reverse lights. Any suggestions p1652 this code is for engine ecu for light code start B -XXXX BCM body control module for your light check wiring or check bulb and bulb make match to the ...

...reverse lights on my 2006 Dodge Ram 2500 will not come on. The light bulbs are fine and fuse is ok. Appreciate any suggestion The actual reverse switch that controls the lights will be located on the ...

(if equipped). Remove the clip (R/V Series) or unclip the switch (C/K Series) and unplug the electrical connector from the brake light switch. Remove the switch. Installation is the reverse of removal

not work when I put it in reverse but if I move the shifter a little up towards park they come on what can I do to fix this problem 1989 Chevy pick 2500 adjust the position of the reverse light sensor