1999 Dodge Ram "rear drive shaft torque specs" Questions

Ad

Question about Dodge Ram

1 Answer

rear end leaking out of yolk on unversial joint I presume you are trying to say your drive shaft is leaking at the differential flange. If so it will require removing and washing with a degrease ...

Ad

drive shaft bolts 250Nm or 184ft/lbs looked up info in my database, 03 explorer sports trac, 4.0L, driveshaft remove and install, driveshaft to rear axle bolts, 75 ft lbs. Any torque specs you find on

Ad

what is the rear drive shaft bolt torque specs for a 2004 silverado 1500 4x4, 4.8L engine? i use german torque for that application/part. it should be goodentight.

...rear wheel drive, and you mean the nut that's just after your drive shaft, then...If you are replacing the seal, you need to mark the nut and the shaft so that when you re-assemble it you tighten the ...

...rear axle Dana 50 Front Axle Observe the following torques; * Left and Right drive axles-to-cross member: 120-150 ft. lbs. (163-203 Nm) * Axle arm-to-radius arm: 180-240 ft. lbs. (244-325 Nm) * Coil ...

...rear drive shaft i do not know but give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local Toyota dealership in the parts department and they be able to tell ...

...rear drive shaft from the pinion, remove the pinion nut and the pinion itself, then remove the seal and replace with a new one. The tricky part is getting the pinion replaces and getting the correct ...

Question about Dodge Ram

1 Answer

...rear main cap. 4. Lower same 5.Before reinstall prime the pump with engine oil. Pour oil in the exstension shaft while turning the pump. 6. Attach the pump, extension shaft and retainer to the main ...

...rear wheels,raise vehicle front and safely place jack stands under each side of lower control arms..Spray lube front drive shaft mounting hardware and lock nut that holds Yoke on front diff..Let it ...

...rear axle cars only, not front drive, the fronts are on a  spindle that is easily accessed, Just rocking the wheel will tell you if it loose, but always listen first for for dry grinding sound, ...

Not finding what you are looking for?
1999 Dodge Ram Logo

2,544 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 Dodge Ram
1994 Dodge Ram

197 Questions

2004 Dodge Ram
2004 Dodge Ram

173 Questions

1998 Dodge Ram
1998 Dodge Ram

143 Questions

1990 Dodge Ram
1990 Dodge Ram

114 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...