1999 Dodge Ram "front axle" Questions

Ad

sure the front axle engages, and grab the front driveshaft and turn it back and forth sharply while watching the u-joint. If it's bad you'll see the axle side roate a little bit but not the wheel side

Ad

...axle is the main speed sensor, the front sensors are only there if it has 4 wheel abs. The vehicle speed sensor is located on the top of the rear axle. Pre 1998 the speed sensor signal comes from the ...

Ad

front axle to hub nut torque spec on 2004 doge ram 1500 4x4 Here are the specs you're looking for: • Font axle to hub nut torque 185 ft-lbs • Front hub bearing bolts 60 ft-lbs • Caliper housing bolts ...

Question about Dodge Ram

1 Answer

...front axle connection actuator. this is a vacuum motor on the passenger side of the front axle. there are vacuum lines that are connected to it, and the sometimes break or become disconnected. If all ...

...front drive axle, I believe it is on the right side top of the axle. It has vacuum lines to it that engages a fork to the axle and locks it up, also this is where the 4x4 indicator lite is located

...front axle in a vacume operated pod near the passenger side. the main cause of the light staying on is a vacume leak .check the lines for cracks or something could have knocked them off. follow the ...

...front axle u joint replacement.Dodge 1989 100 How hard and costofparts u joint is 20 to 35 depends on quality,,but u have to take rotor off hub & bearing,,to get the axle out to service the u ...

...front axle on the side you are removing to hold axle from dropping to low or you can just jack it back up to line up the shock,HERES A PICTURE TO SHOW YOU WHERE TO REMOVE THE TOP NUT AND BOTTM

...front axle actuator. actuator works with hand vacuum pump. vacuum is not changing when transfer shifter is move from engage to disengage. vacuum at axle actuator stays on disengage side of actuator. ...

...front driverside axle out of my 05 dodgeram Remove the hub if the axle nut is loose. Look at the inside of the spindle, you'll see three bolt heads. They hold the hub and bearing in place. Once you ...

Not finding what you are looking for?
1999 Dodge Ram Logo

2,544 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 Dodge Ram
1994 Dodge Ram

197 Questions

2004 Dodge Ram
2004 Dodge Ram

173 Questions

1998 Dodge Ram
1998 Dodge Ram

143 Questions

1990 Dodge Ram
1990 Dodge Ram

114 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...