1999 Dodge Ram "belt tensioner" Questions

Ad

...belt tensioner, use a ratchet and socket,pull up on ratchet to remove tension on belt. remove belt from tensioner. Remove the mounting bolts holding the old tensioner on engine block and install new ...

Ad

Question about Dodge Ram

2 Answers

...belt past and onto the tensioner pulley. release tension on tensioner. be sure to check tensioner indexing marks located on the tensioner arm this is to make sure the new belt is installed properly. ...

Ad

...8n either direction? replace belt and make sure power steering fluid is full and check belt tensioner, make sure its keep tight tension on belt it should move freely with lots of tension . good

...belt. How do I get a little more movement out of the tensioner pulley Crank on that tensioner & use your fingers to roll it on the pulley,all belts ****. also make sure you have routed the belt ...

Question about Dodge Ram

1 Answer

...tensioner pulley away from the serpentine belt, just long enough to slip part of the belt off of a pulley. Any pulley that is easiest to access, doesn't matter. Then slowly release the tensioner ...

Question about Dodge Ram

3 Answers

...tensioner. Remove the belt and check all pulleys for side play and wobble...likely you will find one loose (bad bearing) whichever it turns out to be, change it. (likely what killed the belt to begin ...

how do i fix the seat belt rewind on a 1999 dodge ram 1500. The belt was twisted so i removed it from the reel. In the process the reel spun releaving the spring. I tried to rewind the reel but i ...

Question about Dodge Ram

4 Answers

...belt tensioner is locked up ? See if it's turning Check your tensioner also replace your coil I had an intermittent coil if not then cam sensor try a new spark plug No think a belt might be slipping ...

...belt so I can replace it.How does the tensioner work It has a square hole in the center for a 1/2" drive ratchet or breaker bar,Just put the tool on it and pull and the tension will be released. ...

Question about Dodge Ram

1 Answer

...were are trying to bypass the ac but we cant seem to find how to tighten the belt To install a shorter belt,will require you to replace alternator bracket . The auto tensioner will not work properly

Not finding what you are looking for?
1999 Dodge Ram Logo

2,544 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 Dodge Ram
1994 Dodge Ram

197 Questions

2004 Dodge Ram
2004 Dodge Ram

173 Questions

1998 Dodge Ram
1998 Dodge Ram

143 Questions

1990 Dodge Ram
1990 Dodge Ram

114 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...