1999 Dodge Ram "1500 auto start" Questions

1500 4.7L with auto shut down activated, would changing the ECM and having it flashed to the same as the ECM with the shut down take care of this no crank no start problem? Do yourself a favor an take

1500 the van will start some times and when it dose run it seems to bog like no fuel ill step on the gas it stalls can a cadillac converter cause this? the fuel pump is good the wirers are all new and

...1500. shuts off and wont start until cools off. These Dodge trucks are known for the pick-up inside the distributor going bad and causing this symptom. The pick up module can be bought at any local ...

...1500 WILL NOT SHIFT OUT OF FIRST THEN REMOVED NEGATIVE BATTERY CABLE. PUT IT BACK ON DROVE DOWN THE ROAD ABOUT A MILE STARTED SHIFTING AS IT NEVER HAD A PROBLEM, BUT THE CHECK ENGINE LIGHT CAME ON? ...

...1500 electrical The battery died, I attempted to recharge it and eventually replaced the battery. Now the headlights come on automatically when engine started, (auto-sensing headlights not on this ...

...1500 died while driving, no power to coil No power to coil, no error codes able to be read, tested wiring harness with continuity tester, was fine, any suggestions? the auto shut down relay supplies ...

...1500, after 1 second of turning over, hand slipped & key turned off. Immediately turned key again to start, now the buzz sound of the fuel pump is lower in volume, and while turning over tries to ...

...auto parts for $ 125.00 hope this help's i have a dodge ram 1500 1999 and it did the same thing no mechanich for some reason couldnt find the problem till i completely broke down and seen the code it ...

...1500 with 84K on it. The transmission started slipping and went out very quickly. He is now on his 3rd transmission, (put it in yesterday) but it is still not working. He can't get it to shift out of ...

start issue...but I still cant get my low beams to turn on. High beams and fog lights work fine still. Malfunction light is off, for now. I tried the key reset, which gave me no codes, just said "