1998 Dodge Ram "4x4 front" Questions

...4x4 switch is located on the front axle in a vacume operated pod near the passenger side. the main cause of the light staying on is a vacume leak .check the lines for cracks or something could have ...

front drive shaft fitting (2500/3500, 4X4 & Powerwagon) Lubricate tie rod end links - Powerwagon Check automatic transmission fluid level Check manual transmission fluid level Check the coolant level,

...4x4 is not working need to check the central axle disconnect (cad) to make sure the vacuum lines are still attached, and check the vacuum pump to make sure it is working when you select 4wd. cad ...

...front hubs wont lock in so i cant use my 4x4 and i checked the vaccume lines and everything seems fine there. any ideas? the vacumn motors are usually the bad part on those. remove it from the axle ...

...4x4 truck making a grinding nose in the front end. I have changed the frot wheel barings on both sides greased the front end changed shocks and checked the axles How about the u-joints? Could be the ...

...it supost to be or not i dont see a spot to hooke it up its a 1999 dodge 4x4 any solutions will bee vary apreceated this vaccum line conrtrols the front axle to engage when you put it in 4 wheel ...

...4x4 truck. Constant 12V+ Red Switched 12V+ Red/White Ground n/a Illumination n/a Dimmer Orange/White Antenna Trigger Yellow Antenna Right Front Front Speakers 6" x 9" Doors Left Front (+) Dark Green ...

front axle to hub nut torque spec on 2004 doge ram 1500 4x4 Here are the specs you're looking for: • Font axle to hub nut torque 185 ft-lbs • Front hub bearing bolts 60 ft-lbs • Caliper housing bolts ...

...fine. 4x4 light stopped coming on and front hubs won't engage. You have a Vacuum Leak that is not allowing the Front Hubs to engage... I do believe that 1996 Dodge has Vacuum hubs on the ...

i am looking for the drain plug on a 1999 dodge 1500 on the oil pan above the front axle (if 4x4) or if its 2wd it will be behind the front crossmember