1988 dodge idles fast all the time Idle is fast all of the time if it is a carby model the check the fast idle cam for the auto choke or adjust the choke setting
clock reset Does anyone know how to reset the time on clock for a 1988 Dodge Aries? press the set button push the volume button in, it's going to either show a P or an A press the set button again ...
...replacement, but it will also show you what you need to remove to change the axle , ( which he has set off to the side ) ...
...before long to force these gas guzzlers off the road so get the emmisions down within the limits set by the toyoto convention .So think about the small diesel car and dont dismiss it .Price of ...
...set timing on my 91 nissan truck To set the timing on your 1991 Nissan truck, follow these steps: Locate the timing marks on the engine. They are usually located on the front of the engine, near the ...
...SET TIMING ON 1997 5.0 ENGINE IN k1500 TRUCK unplug the relay it should have a black and a tan set of wires, it could be on the fire wall or by te distributor, mark your timing marks on the vibration ...
set base timing on 1999 escalade The base timing can be set by lining up the timing mark at TDC for cylinder 1 with a timing light. The truck may still run badly because the ECM will need to be set to
setting the timing with a light ? if you are setting the timing it should be set at about 10 before top dead center or maybe would run a little better at 12 or so thanks jerry holler if you have more
Set Timing to 4 degrees btdc. When I reconnected my bypass connector the mark on my damper should have move dramatically, IT DID NOT MOVE AT ALL. what would cause this to happpen? set it at 12 degrees
set the clock on 91 gmc truck. Battery was replaced and I need to set the correct time. With the radio off, hit set then use the scan and seek buttons to set the time. When you are done, hit the set ...
117 questions posted
Usually answered in minutes!
44 Questions
33 Questions
23 Questions
16 Questions
13 Questions