Question about Dodge Ram 50
...top dead center for a timing belt replacement. I just need a diagram to show me where the timing marks are located, where should the camshaft pulley mark be pointed to ? 1986 Dodge Truck RAM 50 4WD ...
Question about Dodge Ram 50
top dead center and put all back together i suppose i need fireing order and marks for timeing on all gears For the 1986 Dodge Ram 50 2.0L AND 2.6L 4-Cylinders: Firing Order: 1-3-4-2 Cylinders: (back)
...with the marks on the timing cover showing the degrees of timing,note there is before top dead center and after top dead center timing marks shown and the marks that you use is before top dead
...of 5 marks what is the 10 mark The timing marks indicate degrees of advance. Thus, the first mark would be top dead center and in increments of two it increases to 10 degrees before top dead
...on top dead center rockers are rocking and the mark on the harmonick balancer shows marks on top dead center and the over head cam has a mark on it to lines up with a mark on the timing cover
Question about Jeep Cars & Trucks
...top dead center by checking the air flow out of cylinder #1. As the #1 piston comes to top dead center the flow will stop and watch the top of the piston until it starts to go down. It it has a ...
...top dead center to set timing marks,because my are way off. If I set all the marks they all line up but, I'm not in top dead center. As you can see in the foto the mark is not at 12 o'clock but, I'm ...
...top dead center. This static timing is all that matters and the computer will be able to control the timing as long as the ignition rotor is in that position when the engine is at top dead center. 1. ...
top dead center. you can check this by putting a screw driver in #1 spark plug hole. if you can't get it in very far because it runs into something then you don't have it top dead center. you can turn
Question about Cars & Trucks
...on one side of the motor is some marks "ubove top dead center and below top dead center" as well there is some marks on the block were the distributer is that allows you to goven your timing as ...
110 questions posted
Usually answered in minutes!
20 Questions
15 Questions
4 Questions
119 Questions
100 Questions
