1986 Dodge Lancer "nut size wheel bearing hub" Questions

...size of cotter pin and bent the ends around the axle nut.---- coat the inside of the hub cup with grease. Now, use an rubber or plastic hammer to install the cup on the wheel/tire hub. You are ...

size socket do I need to remove the left rear axle nut to replace the bearing? need to replace the wheel bearing in left rear wheel but need to know what size socket is needed Hi Bobby,here's a repair

what size is the hub and bearing nut on a 1996 pontiac sunfire front wheel bearing what size is the hub and bearing nut its not 36 mm

...size the front half shaft nut/ lock nut/axle nut- is. its probably a 33mm thats the only special tool you will need. Unscrew it, take your outer tie rod off the spindle/steering knuckle, theres 3 ...

...NUT WHICH IS TORQUE ON ABOUT 200 FT LBS.USING A SIX POINT AXLE SOCKET SOCKET SIZE COULD BE 34 OR 35 METRIC 1/2 INCH SOCKET.YOU NEED 1/2 INCH BREAKER BAR.ONCE YOU LOOSEN AXLE NUT A LITTLE THEN RAISE ...

rear wheel hub nut what size is the nut to remove the bearings? I used a 32 mm to remove hub nut on front. I guess it would be the same for back hub nut.

...size, install a new outer oil seal into the steering knuckle. Apply multi-purpose grease to the seal surfaces which will contact the driveshaft. Support the knuckle and drive in a new dust deflector. ...

...size socket required for a 2012 Ford Fusion Axle nut? Also, what is the Torque spec to secure it back on? Working with Front-Right wheel. The one that fits! That's not the way it works. you buy a ...

size socket for the hub nut, and use a long socket extention(breaker bar, the longer the socket extion the more torque you will get on nut) with a heavy duty socket wrench. 3.) If it still won't budge

...size is the drive shaft hub nut? I have a 1/2 inch socket set but that nut looks special. Thanks. the nut is special its metric, the parts store will know its like a 30or35. i know an inch and a half ...