1998 Dodge Ram 1500 4WD "outer spring pliers" Questions

Ad

Question about Dodge Ram 1500

1 Answer

...outer sheath around the inner wire cable, then with a pair of vise grip pliers pull the inner cable while someone pushes down on the hood over the latch to lessen the spring tension and ease ...

Ad

...spring still nested in the end) into the outer tube until it stops. Then slowly screw the inner tube back into the outer tube until it is somewhat tight. Make sure that you don't cross the threads ...

Ad

Question about Dodge Ram 1500

1 Answer

...outer casing. The other option is to crawl under the front bumper and see if you can get your hand on the release arm. The cable is attached to it. Have a helper push down slightly on the hood, over ...

outer ball joint nut. Press ball joint out of steering swivel member using puller tool or equivalent, installed on spring link. Remove nut and discard. This self-locking nut must not be reused. Remove

Question about Dodge Ram 1500

1 Answer

...releases it may spring into outer space never to be seen again. Then just pull the old knob off and install the new one. Good luck and if you have any other questions about this just leave a

Question about Dodge Ram 1500

2 Answers

...spring with it) downward and to the left and engage the pivot hook of the lever in the hole in the secondary brake shoe. Check the entire brake assembly to make sure that everything is installed ...

...hold upside down depress spring lock and turn outer ring left till stop than turn back right 2-1/2 turns aligning arrows on front slide back on shaft reassemble good luck and thank you for using ...

...spring but with the hood catch released and a long screw driver and a bright torch you can with a struggle go between the catch at an angle to price the catch claw to one side, but at the same time ...

Question about Dodge Ram 1500

2 Answers

...outer sheath is sticking and binding. Don't bother lubing it on a '86, that'll only help a month or so. You may also need a new nylon drive gear inside the transmission housing (needle nose pliers ...

Question about Dodge Ram 1500

2 Answers

...outer O-ring. 7.Remove the spring. When assembling, use a new gasket and O-ring. 8.Remove the pulley nut with the spring washer. 9.Pull off the pulley and the woodruff key. 10.Remove the snap ring ...

Not finding what you are looking for?
Cars & Trucks Logo

1,993 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...