torque spec. on bearing cap bolts on front diff on 98 dodge ram 1500 80 ft lbs.
...ft. lbs. any help? Thing here is that when you do change a gear in a resr diff, you need to adjust the pinion gear(this is called in mecanic's word pre-load of your pinion gear)first witch is ...
i need the torque spec. for the rear diff carriar bolts for a 2006 jeep liberty DIFFERENTIAL COVER BOLTS TORQUE IS 30 FT LBS.
...ft. lbs.) pinion preload: 17-27 in. lbs. w/integral carrier or 22-32 in.lbs. w/ removable carrier. Tightening the carrier bearings isn't so much a torque setting but more or a tightening procedure. ...
Question about Cars & Trucks
what are the torque specs on a 1978 FJ40 front diff cap bolts? around 94 nms which is 70 ft lbs
Question about Jeep Cars & Trucks
...ft./lb. my diff is a 10 bolt diff and is flat at the bottom but i dont know what kind it is 4wd ? not told DRIVE_LINE at all, sad. the service manual covers all this ,why not just read it. front or ...
...ft. lbs.). CAUTION Never loosen pinion nut to decrease pinion bearing rotating torque and never exceed specified preload torque. If preload torque or rotating torque is exceeded a new collapsible ...
them more than about 12 ft lbs torque, as these bolts go into the sheet metal wall of the arm, and there's no need to try to strip out these threads... Just secure them a bit, not to tank down on them
Torque specs.for front diff. case bolts is not listed in manuals. WELL THE DIFFERENTIAL COVER BOLTS TORQUE IS 30 FT LBS.
1,993 questions posted
Usually answered in minutes!
264 Questions
1,788 Questions
1,048 Questions
677 Questions
707 Questions