1997 Dodge Ram 1500 Club Cab "gas car reverse" Questions

magnum it runs fine in drive and isles great but will not stay running in reverse unless your holding the the brake and pressing down on the gas Sounds like the converter may be stuck in lock position

gas fill has a label. You want to use the LOWEST that you can, as lower octane is more explosive than higher... (reverse of what you thought...). Higher octane RESISTS detonation, by lower volitility.

...gas makes for easier handiling either way once you get access to the top of the tank you will have to use a straight edge and a hammer in order to release the locking tab on the pump once the tab is ...

reverse, the idle goes up and down and ends up dying unless i press the gas pedal, but sometimes it will die anyway, what can this be? I called the factory cause I recently had a new ECM installed and

...reverse, the problem you have is likely a malfunctioning valve body. this problem is common with the 46re trans log onto http://genosgarage.com this site is dedicated to rams both diesel and gas. in ...

...reverse, it would die and he has to keep his foot on the gas to keep it running. Even when it idles ok when you start, as soon as it gets warm, it will start to die, and won't stay running when you ...

reverse and sometime just letting off the gas, or coming to a stop? Error code says vacuum leak wow no year stated, nor engine size, you make this very hard. stalls are complex. how to cold engine? we

...reverse Check engine light came on. Bought new gas cap as the codes pointed to vapor barrier problem. Has stalled 2 times since then. Light is back on. 4.7 liter engine 4x4. 96K. Thanks in advance ...

...gas and put it in the tank only to have the same problem of not cranking. next day it turned over and (even when in park revving the engine, in drive, and in reverse) it would work ok. a few hours ...

...gas pedal to the floor to even move,truck doesn't stall like normal fuel pump trouble.Any idea? truck is 1995 no check engine light on I recommended checking fluid level in trans. first. If that's ...