1997 Dodge Ram 1500 Club Cab "car gas voltage" Questions

Ad

...increase up to 5.0 volts, there should not be a break in voltage as you press paddle, if it drop while pressing gas paddle bad sensor, computer don't know how far on the gas your foot is at.Good

Ad

Question about Dodge Ram 1500

1 Answer

...Voltage Bank 2 Sensor 1Possible causes - Faulty Front Heated Oxygen Sensor Bank 2 - Intake air leaks may be faulty - Exhaust gas leaks - Front Heated Oxygen Sensor Bank 2 harness is open or shorted - ...

Ad

...gas,temp,voltage,ect.). I have tried to get a code from it but none show and no DONE code either. I have checked and cleaned(alot of corrosion near the ocean)alot of the ground wires and such, but ...

gas pedal?? Hi I litoshop first you have to check battery voltage while starting and have your truck scanned it sounds like there's a sensor is failing western auto or pep boy usually give a free scan

Question about Dodge Ram 1500

3 Answers

...voltage values exist, but are less than what they should be, look for problem with wiring harness, or bad pcm. my other thoughts are partially plugged fuel filter/pressure sensor, or a vacuum leak ...

...Gas smell when cranking and fuel pump working fine. Any other ideas? are you sure that you changed the ASD relay? that code is for no signal from the ASD to the PCM. Check that you have constant 12v ...

...gas pedal together. Unfortunately, this is a dealer only repair most o the time, since the ECM will have to be flashed to sync the new sensors. P2138 Throttle/Pedal Position Sensor/Switch "D" / "E" ...

Question about Dodge Ram 1500

1 Answer

...Gas Recirculation (EGR) system is controlled by a vacuum solenoid. The solenoid is supplied ignition voltage. The Powertrain Control Module (PCM) controls the vacuum solenoid by grounding the control ...

...voltage at the coil or injectors. I do not hear the fuel pump coming on either. I do have an active ground, at the asd relay. On the fuel relay, when I jumper that, I can hear the pump coming on. Any ...

Question about Dodge Ram 1500

1 Answer

...gas the blower starts to work again. You have a STRONG Voltage Draw on the Electrical System and it is not being able to provide the entire car with Power. Test your Alternator, you may find out that ...

Not finding what you are looking for?
Cars & Trucks Logo

1,051 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...