1991 Dodge Ram 350 "oil sending unit 92" Questions

...the oil pump. if you do have oil in the motor and its getting to the top of the motor then you need to check the oil sending unit wire if its good and tight then I would replace the sending

LOCATION 92 FORD EXPLORER OIL PRESSURE SENDING UNIT should be fairly close to the oil filter.. Where is the oil sending unit located on a 1993 Ford Explorer?

...92 S-10 4.3 check gauges light flashing upon high rpm, temp gauge remains at cold, and oil pressure gauge spikes upon any throttle response. may be a grounding problem or the oil sending unit is ...

...with a manual gauge to know the exact oil pressure. If it reads different then it's the sending unit or the gauge itself that is the problem. Most often it is the sending unit. I hope this

oil pressure sending unit on the engine. If your vehicle is the 3.8 GM engine , then follow the video. The placement of the sending unit is the same for the 3.8 engine in different makes and years for

...sending unit,(this unit is on the motor)is malfunctioning, or your engine oil pump may not be providing enough pressure. This could be due to sticky oil pressure bypass valve,,worn out pump,,or worn ...

...sending unit is leaking oil, then you can also tke the wire off of the sending unit and ground it and unhook it and see what the guage does, hope this helps Install a manual oil pressure A thumbs up ...

...unit by distributor...do i have to pull the distributor? Not with the right tools by the Oil Pressure Sending unit (AKA OPS) tool that will fit in there you may have to contort your body a

...every now and then, But seems that it does it if it sits for longer than 2 hours and sometimes it starts just fine and no problems. check the oil pressure sending unit. pos loose wire. or cracked ...

...of my engine above the oil filter. It's a 1992 mercury Topaz GS 2.3 4cylinder possibly the oil pressure sending unit- looks like a small spark plug screwed into the engine with one wire going to ...