1989 Dodge Ram 50 "adjust weber carb" Questions

...WEBER. Much cheaper than a crappy factory one. When I replaced the carb with one from Autozone the Electric choke has been not working right since DAY 1 But did not let it bother me.. HELP PLZ! ...

adjust untill your happy. I have a similar problem with my 89 Ram 50, 2.6L. I had the cat checked, good. Replaced fuel filter and pump. Checked the float level. I have not done a compression test yet.

Weber Carb on my Model A Ford. It stalls out when accelerating up a hill. Can you help with where to start adjustments? This car has electronic ignition and a fuel pump. After researching this I added

...adjust fast idle link assembly on weber 34DGEC http://www.jeepforum.com/forum/f8/weber-34-dgec-carb-too-rich-jets-tune-jeep-4-2-258-a-631105/ ...

Weber carb.I never had a issue with having to adjust the valves.My old carb at the end would always idle high.The timing might not of been set right with the new timing chain.I have the factory repair

weber carb i have a 73 vw beetle just got a new 32/36 DFEV VW carb kit put did not come with install guide if you can help thanks video or pic would be great Remove the old carb. Bolt the new carb and

...here, in 1995 post country post symtoms and win I would get a 32/36 dgv progressive two barrel weber easy to adjust small primary large. Secondary as long as you keep yoir foot out of it. Gas is

weber carburetor it takes a long time to start in the mornings battery even dies sometimes before starting what do you recomend Check that your choke is working properly. Start with a tune-up, new gas

...weber has all its part so it works properly . HELP!!!! Carrson Mccleary The idle mixture screws do not control the idle. Is there no idle screw? If you have an anti-dieseling solenoid on the idle ...

...Weber Carburetors", by Pat Braden, from HP Books. The main thing I had to do was adjust the idle mixture screws. Seat them lightly (screw them all the way down, but not tightly), then turn both of ...