1989 Dodge Ram 50 "89" Questions

fuel pump location on an 89 dodge ram 1 ton, because my van stalled & it wont start. in tank

looking to find a new carburetor not a kit for my 1989 dodge ram 50 A new mikki carb is about $900.00+, I have 89 D50 and I install a new Weber for $269.00 2 yrs ago works great [email protected]

how do i remove the bed off an 89 dodge ram 50 the fuel pump on top of the gas tank is loose and i dont want to drop the tank so i want to be able to access the fuel pump my taking my bed off That is ...

were is the ignition fuse or circuit in a 89 dodge ram with a 318 we just change the distributor & coil it started yesterday but it will not start today we also put new wires distributor cap & rotor ...

...still need more power move to 5psi, adjust untill your happy. I have a similar problem with my 89 Ram 50, 2.6L. I had the cat checked, good. Replaced fuel filter and pump. Checked the float

...secondaries for the extra horse power needed for picking up speed and going up hills. I drive an 89 Dodge Ram50 and was having the same problem until I replaced the air filter.  Vast ...

gas is getting in the oil in my 89 Ram 50. What can cause this? the rings on your pistons are bad that is sometimes caused by the carburator float not shutting off the fuel when its full ..(thats if ...

I need to get the front hub removed from my '89 dodge ram 50 4wd to replace the half shaft. Please help! right or left side? Use 3 wheel nuts in order to attach the J 42129 to the wheel bearing/hub. ...

...module but the coil is not receiving any electricity so i have no idea thanks for any help The 1989 model is wired differently from the 1990 model. So this is for the 89 model only. You should