1987 Dodge Ram Wagon B250 "van wiring" Questions

...van goes in revirse but no back lights work I put new bubs in same problem Really dont need to know color of wire for this system is simple. On the switch (left rear corner on transmission) there are ...

1988 dodge 350 van 360 V8 When is is hot(not 1988 dodge 350 van 360 V8 When it is hot(not over heated) several times it would not start and one time it just died in the middle of the street. When I ...

1989 Dodge Ram B250 Van. Fusebox wiring diagram? https://www.google.com/search?q=1989+Dodge+Ram+B250%2C+fusebox+wiring ..

van has a security system in it, it could be causing this problem. they usually disable the starter circuit. Paul has listed good places to start. but if they don't fix it do this: when your trying to

my 1992 dodge van fuel gauge stoped working slowly, it read full when i filled it i would drive about 10 miles then it would show empty a few more miles then show half tank then empty now nothing.. ...

...van with a 5.9 litre the code is for intermitent loss of cam or crank sensor...one of the sensors maybe going bad or i have run into the wiring where it comes over the rear of the engine chaffing at ...

i have a 91 dodge van b250 i have replaced the head light switch and the dimmer switch and checked the fuses but the high and low beams do not work Hi, assuming your parking lights work, I would say ...

...van ram 250 temperature sensor circuitry-- is there a relay in this circuit? The temp gauge does not work-- we have replaced the sender unit--checked the gauge itself and the fusing and both are ...

i have a 1994 dodge ram b250 conversion van with a 3.9 v6 and i had to put a timing chain and gears in and now i can get it to fire no spark all it does it whirl over and again no spark from dist. to ...

...any input you can provide. I also had a problem where the ignition coil kept burning out. The van did not have a ballast resitor, so I put a two wire resistor inline. This saved my coil from ...