1998 Volkswagen Golf "cam" Questions

...P0341 code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead ...

what is the mk1 1400 camshaft degrees?250.260 or what? I whant to put a 272 degree cam in my 1400 vw but would like to know what the standard cam cut degree is example 250 degrees or what? Most dash ...

oil change and cam belt/timing chain change for volkswagen golf 1.9cc tdi 130 bhp, 1992 model support engine. remove coolant reservoir. remove serpentine belt. remove serpentine belt tensioner. remove

...AT LEAST $2500.00 .FIRST GET A PRICE CHECK TO BE ON THE SAFE SIDE. NOW WHEN YOU REPLACE LIFTERS.THE CAM HAS TO REPLACED ALSO. THE LABOR RATE.IT WILL TAKE 4 TO 5 HRS.TO REPLACE.YOU HAVE TO TAKE ALL ...

just changed cam and valves in my 1.8 turbo but went to start it and car just bangs and bangs please help You obviously have the wrong cam timing and you may have the valves set too tight.

If the cam belt on a 99 golf snaps do you have to change the timing belt too? the cam belt is the timing belt...and if it snaps you would want to check is there any more damage done e.g valves piston ...

cam belt replacement proceedure for VW AGN engine VW AGN (1.8 20v) engine cam belt replacement proceedure. hi i have a picture and removal instructions with the picture if you want it i can email it ...

cam shaft position sensor where is this located. let me have engine code then i can tell you its inside the timing chain cover(behind the cam pulley) on the right of the engine(golf mk4) Golf mk3- its

cam belt replacement how to replace a cam belt and set timing as the belt broke that is an interface engine.damage will be done to your valves.and pistons.

8 20valve golf cylinder head timing chain , i can only find the one on the belt side i have put the cam on TDC for the ex-valve but can't just find mark for the in-valve cam please help The 2 cams