1995 Volkswagen Jetta "sending unit" Questions

...sending unit, you do not get voltage from that wire for the sensor you need to use a multimeter and test for ohms, every manufature is different and cant recall what it should be empty or full. Get a ...

...sending unit switch I have a 96 VW Jetta GL. It was leaking oil pretty heavily yesterday out of the sending unit. Replaced the switch on top of the sending unit. Today, when I drive the car, the oil ...

sending unit in there also, my guess would be the sending unit is out. the only way to fix it is pull the tank and replace it. If that is what you do i would replace the fuel pump also. If the sending

...itself if funtional i believe the fuel sending unit has gone out could this cause both the gauge to not work and it not to start? Yeah, The fuel sending unit is bad it's in the gas tank. Got to drop ...

...sending unit. It could be a bad sending unit but don't replace it until you test the oil pressure. If you don't want to add the gage inside the car you could install it under the hood or use a ...

...sending unit has failed and needs to be replaced. It's an assembly attached to the fuel pump inside the gas tank. In your trunk floor or under your rear seat is an access panel, through which you can ...

...help! this is a common vw turbo issue. have synthetic oil put into the vehicle and replace the oil pressure sending unit. the sending unit part number is 06A919081J $24.30 from your local vw

...sending unit. sending unit has no pump in it. Where's is the pump? Does any one have a suggestions? there should be one in the tank and a boost pump on the back of the cylinder head,you can hear the ...

...beeper goes off periodacally changed oil sending unit no valve noise,car runs fine,unplugged senser still does same thing sounds like there is a short in the wiring to the oil pressure sender

...sending unit malfunction. Where is the sending unit located? What model? I'll take a stab at it and guess Beetle. The sensor is in the hose running across the bell housing just behind the engine. ...