1995 Volkswagen Jetta "engine sensor" Questions

...Engine Temperature Sensor Content for class "spacer" Goes Here Temperature Switch Content for class "spacer" Goes Here --- Coolant Temperature Sensor Fig. Remove the coolant temperature sensor The ...

...sensor. P0116 - Engine coolant temperature circuit range/performance. Symptoms: Check engine light on. Possible Causes: Low engine coolant level, ECT sensor harness open or shorted, ECT electrical ...

sensor for each type of engine. Advanced says they sold me the one for the ALH model. But my engine is the BEW type. Thanks it can make a difference with the units. i have just changed the same sensor

engine coolant temp sensor, Where is it and what are the steps to changing it. Heed of engine temperature!!! (Wait for engine cooling). The engine coolant temperature (ECT) sensor is placed on back of

sensor causing check engine indicator to come on...how do I change it how do I change a glow plug The temperature sensor/ECT/ is black squire 4 pins sensor with pinlock.Before changing ensure there is

...engine speed sensor it is located next to the oil filter. it uses one 10mm bolt to hold it on. Look for your drive belts on the engine, there will be a big pully at the bottem end of the engine. Look ...

...engine. The ECT sensor should be on your right side of the engine. It may be either black or green and has a 4 blade connector. There is a plastic clip you slide out to replace the sensor. Hope this ...

engine the sensor is located on the coolant line coming from the top of the radiator and runs along the right (driver's side) of the engine. On the driver's side of the engine this hose connects to a

engine sensor internally shorts the 5 Volt reference. Since the 5 Volt reference is a "shared" circuit on many models, this will cause it to be abnormally low. Usually, though this will be accompanied

...SENSOR MAKE SURE ENGINE VACUUM GETTING TO MAP SENSOR AND THE SENSOR WIRING CONNECTOR IN PLACE TIGHT WITH NO DAMAGE WIRES.USE SCANNER SEE IF MAP SENSOR WORKING, MAP SENSOR VOLTS SHOULD READ 4.6 - ...