idle screw is siezed on my 1988 VW fox, therefore I can't adjust the idle, because now it idles to slow SPRAY IT REAL GOOD A FEW TIMES WITH WD-40 AND LET IT SET FOR A HOUR OR SO THIS SHOULD FREE IT UP
...cooling fan (no AC) 20. Heater blower (AC) 21. rad cooling fan (AC only) 22. empty 23. Ox sensor, idle stabilizer,seat belt warning relay, (Digifant only, control unit, idle boost control, idle ...
Question about Volkswagen Fox
1990 Fox Drops to Slow idle speed after 10-15 minutes Driving Engine starts fine but looses all power, but continues to idle slowly reguardless of throttle position. I suspect the j-tronic injection ...
STALLING OUT WHILE IDLING turn up the tick over slightly untill it is running ok
...Fuel/Engine Miss 1990 Volkswagen Fox GL Engine Starts right up, but after it kicks down from high idle it hesitates during acceleration and over fuels, but once traveling at consistent road speed ...
...battery. You'll need a multimeter for this. First off, once started, test the battery voltage at idle. Then increase RPM to about 2000. The idle reading could be as low as 10 Volt(since you just ...
...miles in the last year. Have your alternator retested. If you have a voltmeter it should read (at idle & connected to battery) 13.1v-14.8v anything lower = bad alternator. You are not doig ...
...is cause because at cold start the engine needs a rich mixture in order to maintain a smooth idle,before driving the car,when starting from cold ,what you have to do is to accelerate up to
1992 VW Polo 1.3L Coupe: warning light mystery 1992 VW Polo 1.3L Coupe: On starting, dashboard console ignition/oil/battery warning lights initially behave as normal: all on, then battery goes off, ...
...flow sensor plate(Spray gunout on a rag and lightly clean it ) Gun out throttle body and a slight idle adjustment. Finallyonce a month put some fuel injection cleaner in the tank. See how this
39 questions posted
Usually answered in minutes!
57 Questions
31 Questions
22 Questions
4 Questions
1 Questions