Question about Pontiac Grand Prix
...morning start loud noise freshair box front left of car where air filter is ,on cold start first 3or 4 min. there is a loud sound like bearings grinding or bad solinoide you can hear it from inside ...
...Brakes Grind in the Morning when in Reverse Recently (when the weather started to get colder) when I backup in my driveway first thing in the morning and hit the brakes my back brakes make a grinding ...
Question about Pontiac Grand Prix
...noise once again. However it only does it first thing in the morning yet the car sits for a longer period of time while I'm at work then when I'm home, yet it doesn't do it here when I back up to ...
...lights on. This morning it made a loud grinding (metal) noise and seemed to have a bit of trouble accelerating. Have the brake pads checked, if they are ok you may have a faulty wheel
...brakes need to be bled, this means there is air trapped in the fluid lines. Usually this will make the pedal feel mushy when it is depressed. It would not make grinding noise because of air in the ...
...check the rear axle bearings for excessive play or the source of the noise when he checked the rear brakes if this was not checked properly you may have a bad bearing that is making the
Question about Cars & Trucks
...noise when I start in the morning , goes away after a while, what causes this 1994 mitsubushi dimante If it comes from wheel area it could be brake pad wear warning noise, brake pads grinding your ...
Question about Pontiac Grand Prix
...noise. I immediately stopped and check for anything broken or hanging down (it sounded like something broke), but I couldn't see anything. When I started driving (slowly) again. I could hear a ...
...starting making a grinding/dragging noise from the front end when in gear at mid rpms. Any idea?? check your brakes I had the same thing. It was the bearings. I payed about $300 to have it
Question about Pontiac Grand Prix
...by two other shops--they confirm it's not the brakes. Find a shop that has a chassis ear By Steelman it is a 6 channel microphone that can be placed along the frame to determine the noise
692 questions posted
Usually answered in minutes!
1,496 Questions
1,236 Questions
1,211 Questions
1,043 Questions
1,014 Questions