2003 Pontiac Grand Prix "axle nut socket size 2002" Questions

front axle nuts size for 2003 pontiac grand prix need to know metric size of axle nut 2002 Grand Prix front axel nut holding on hub is a 33MM or 1 5/16 deep socket

axle nut off of my 2002 cavalier I am wanting to change the front drivers side wheel bearing assembly, but I cant get the axel nut off. The replacement assembly which includes the new nut to go on the

what size axle nut socket for a 2002 mitsubishi montero - Not the sport model. Do you mean lug nuts or the axle stub nut?

axle nut on a 2003 ford escape For a 2002 Escape the hub nut is 32 mm. The torque specification is around 175 ft.-lbs. Not sure But it will be a METRIC SIZE 32 to 36 mm Very expensive socket No, I'

...axle nut on 2002 chev 1500 silverado 4x4 5.3L Is there a standard & metric size u can use? That looks the same as on FWD GM cars, and they are 36 mm. Use a metric ruler and measure from side to ...

...you need to go and work on the van, i do this at work, i try to help people out i will loosen the nut and then spray thread on the axle to help them loosen it at home, hope this is helpful, good

What size is the socket for the 2002 Dodge Stratus Axle nut? 32mm

...nut on the center axle.. ill appreciated.. thank you The hub/bearing assembly is mounted to the steering knuckle and is retained by three mounting bolts accessible from the back of the steering ...

...nut is for the axle shaft and doesn't get removed. You don't need to remove the big center nut to do brakes. You need a 9mm allen wrench. Try a 32 mm., when you replace it be sure to torque it to ...

...axle nut. If you don't have this proper size, you can rent it from your local Napa store. So then you remove the axle nut and cotter pin if one exists. Remove both of the upper and lower ball ...