2002 Pontiac Grand Prix "pri" Questions

how do i remove the rear door panel on a 2005 pontiac grand prix Instructions1Roll the door window all the way up. Disconnect the car battery's negative cable with a wrench.2. Remove all cover ...

i have a 99 grand prix gtp and i connect the lower ball joint to the a frame helpppp need 2 people for this job. Make sure car is not jacked under A-Frame. Bring hub in to connect axle on splines. ...

How do you get the door panel off 2005 pontiac grand. Remove all screws visible. Pop off window/lock control. Then take a large flat tipped screwdriver or pry bar and gently pry around door panel ...

how do you get into stuck glove box 2004 grand prix ? glove box is stuck. How do I open it? Usually something gets lodged to the top of it. Pry at the sides a bit, and have a look inside. If there is ...

how do you remove the oil pan on 2001 grand prix Remove the motor mount bolts on both sides. Using a jack & wood block, jack the engine high enough to allow the pan clearance enough for removal. ...

i need info on removing rear door panel on 2004 Grand Prix there are Hidden Screws you have to Look Hard for Small Covers to them and Mostly there are SNAPS along the BOTTOM and SIDES Screws are ...

keys locked I locked my keys inside my car. is there any way to get the windows down or any of the doors open to get them out?? A coat hanger stretched out fully, you need a flat head screw driver and

How to remove the exterior door handle of a 2000 pontiac grandprix? Hello, To remove the exterior door handle of the 2000 pontiac grand prix, You will be needing these instruments, wrench set, Putty ...

how do i remove the drive axle on a 2001 gran prix *1. Remove Wheel, *2. Remove CENTER OUTER AXEL NUT Size is " 36 or 34 mm #3 Tie Rod End Remove #4 LOWER BALL JOINT Nut and Seperate it, Using a BENT ...

i cany get the passenger side cv joint loose from where it goes into the trans One is to get a pry bar, and try to pry the joint out of the transmission. There is also a slidehammer tool that will ...