1999 Pontiac Grand Prix "car alarm switch jeep" Questions

...alarm. Plez help me. My car won't start. The battery is gettimg low and it is a brand new battery. I bought the battery six days ago. Hello! The drivers side door lock/unlock switch is more ...

...alarm went off and will not let car start. I use to be able to by pass it by grounding it and now that is not working. Do you think turning the ignition to on position for 10 minutes as you described ...

alarm switch in the drivers door, if it malfunctions the alarm thinks the door has been opened without a key. I had the same issue... It was a broken door switch... Replaced it for about $7... No more

...alarm switch on the liftgate could be bad. (2) The wiring going to the switch could be broken somewhere in the wiring. On the Jeeps its usually broken where the wiring is bending all the time between ...

alarm you can't unhook it. Replace the switch attached to the lock cylinder inside the door. In the meantime, the switch on the passenger door may still be good. Cycle the key in the passenger door to

...switch. Jeep still won't hold a start and alarm is flashing. Can someone Pleeeeeeeeeeeeeese Help me out. check your starter wire as mine was loose and did the same thing every time you interupt power ...

...car. If it's not a factory alarm locate the alarm unit and the main power line running to that alarm and remove the in line fuse from that line. That will disable the alarm and should disable the ...

Alarm activated when it wasn't engaged. Now car won't start runn Car has been running fine. The keyless entry device doesn't work so we lock and unlock the car manually. Yesterday when unlocking the ...

...alarm. If it's an aftermarket installed by a stereo shop, there should be a valet switch under the dash or somewhere, put the key in the ignition, turn forward and flip the dip switch in the other ...

...or switch. Turn the key to the run position without starting the car, either push the button or move the switch in the opposite direction and turn the key off. This should turn the alarm back