2000 Nissan Xterra "remove distributor 2001" Questions

Ad

Question about Nissan Xterra

2 Answers

...remove distributor. Remove cap and check for bearings and/or metallic debris inside of distributor. If so, it is toast. Even if you don't see any metal particles inside, check that the distributor ...

Ad

...remove the distributor cap and someone turns the key a little, if the rotor spins that means the distributor took a dump.. and if the rotor dont spin the timing belt took a dump... i will be checking ...

Ad

Question about Nissan Xterra

1 Answer

...distributor, no pressure in the fuel line, where do I find the fuel pump sending unit assembly connector terminals Most likely corrosion on the sending unit connector. If corroded will need sending ...

...distributor. Mark the shaft alignment before removing the old one and install the new one aligned up the same as the old one was. Just an added tip the 3.0 Litre engine block is the same as the 3.3 ...

Question about Nissan Xterra

1 Answer

...Remove the spark plug and put the cable in it and body ground the electrode of the spark plug. Let somebody to start the engine. If there is a spark comes out, the problem would be the fuel that ...

...Remove the bolt and clean the surface and then refit.....You'll have to go through the whole vehicle until you've checked all of those connections....Once finished, I believe that the problem will be ...

Question about Nissan Xterra

1 Answer

Remove the distributor cap. Mark the location where the rotor is pointing by making a scratch mark on the distributor housing. Remove the distributor adjusting bolt and bracket. Remove the distributor

...remove the distributor cap mark the position of the rotor on the distributor mark the position of the distributor on the intake or fire wall remove the hold down bolt and slowly remove the old one ...

Question about Nissan Xterra

1 Answer

...Move the hold down out of the way and remove the distributor. Reinstall the distributor making sure the rotor points where you marked and that the distributor is seated fully and into the oil

...geek, not a car geek! Thanks. DwC to get to the rear 3 need to remove the intake plenum also the following link will show how to get to the distributor Replacing Distributor on 2 5 6 Dodge ...

Not finding what you are looking for?
2000 Nissan Xterra Logo

970 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...